Titan Telescoping Flagpole Installation Instructions

The Titan telescoping flagpole manufactured in the US is one of the finest flags, made of nylon, and comes up in a kit. It comes with a telescoping flagpole, an effectively sized flag, hardware to fly two flags, a ball topper, and a ground sleeve.

And you can find the below steps to install a flagpole

Step #1

Follow instructions completely. Choose the location for your flagpole and be sure that there are no impediments, utilities or power lines lower than the surface or overhead.

 

Step #2: Dig a circular “Fence Post Size” hole, 16” in length and 30” deep. A longer hole may be mandatory for smooth or sandy soil

 

Step #3: For sure that hole is at least the size confirmed in the previous step. Now shovel in 5”-7” of gravel into the end of the hole. This will give water drainage.

 

Step #4: Set up the stop bolt completely through the pre-drilled hole in the ground sleeve. Hand tightens only. Mix the concrete material according to the manufacturer’s guidelines.

 

Step #5: Push the sleeve “into” the gravel while doing sure that the floor sleeve is at least 1” above ground-level. If you go wrong to push the sleeve into the gravel, it will allow the concrete to close the hole and avoid water drainage.

 

Step #6: Utilize your “red cap” to protect the ground sleeve. Start to shovel the concrete into the hole around the ground sleeve being prudent not to spoil the sleeve position.

 

Step #7: Take-off the red cap to check the sleeve for plumb with a level in multiple places. Install the red cap into the sleeve to avoid foreign objects from entering sleeve.

 

Step #8: Later 24 hours of drying time, remove the red cap, replace your flagpole into the hole.

Contact Us

Ameritex Flag & Flagpole Inc.

31148 Oakview Rd, Bulverde, TX 78163

(210) 310-3524 or (877) 598-3524

sales@ameritexflags.com

NOTE: THIS IS NOT A RETAIL STORE.

This is a home based business. Please call first.

web: https://www.ameritexflags.com/products/20-ft-telescoping-flag-pole-titan.html 

  

Commercial Wall Mount Flagpoles | Concord American Vertical Wall Mount Flag Poles

The vertical wall mount flag pole series from Concord American Flagpole provides a commercial grade, one and two-piece aluminum Wall Mounted Flag Pole design in 3" to 6" butt diameters in standard heights from 12' to 38.5'.  Flag pole heights listed are maximum heights for each shaft.  All shafts can be modified to shorter heights if needed.

What type of flagpole adornment should one choose? Ideally, according to flag protocol, only an American flag should fly on a flagpole decorated by an eagle. Why? The Bald Eagle is America'sAmerica's national bird, national emblem and is featured remarkably on many official government documents such as coins, stamps, and paper currency.

A fun fact related is that a picture of the eagle was made into the official United States emblem in 1787. The incredible bird is representative of ideas that are uniquely American such as independence, freedom, loyalty, and a boundless spirit.

In today's time, the bestsellers are tangle-free poles. It's pretty standard for house-mounted flags to get twisted up in the wind, and old glory looks anything but when this happens. To help keep your flag from getting tangled and damaged, one should buy Free Spin Flagpoles. These flagpoles have internally built ball bearings that will help the upper half of the flagpole to rotate with your flag as it twirls. It will allow your flag to fall back to its natural hanging position. Try to keep your flag poles intact like polyester or fringed flags should not be flown on these outdoor poles.

Ameritex Company'sCompany's best-selling poles are free spin poles with tangle-free technology built-in, so unfurling equipment is not needed. Do add a bracket to your order so you can wave your flag high from your house! Affix your favorite flag to your house with an off-the-house flagpole. The company offers a variety of wall-mounted flagpoles. To keep your flag flying free and proud, we provide our most popular flagpoles that come with tangle-free technology.

 

Contact Us

Ameritex Flag & Flagpole Inc.

31148 Oakview Rd, Bulverde, TX 78163

(210) 310-3524 or (877) 598-3524

sales@ameritexflags.com

NOTE: THIS IS NOT A RETAIL STORE.

This is a home based business. Please call first.

Web: https://www.ameritexflags.com/categories/flagpoles/wall-mounted-flag-poles.html

How to install 25 titan telescoping flagpole

 You will usually find flagpoles in every residential home in the United States of America. Flagpoles denote our patriotism towards our country; even you can flag it for your favorite sports team or honor American Holidays. 

 But we are often stuck with the complete installation of a telescoping or residential flagpole. This blog can guide you about flag technology and more information about poles, ropes, and pulley systems. 

The latest progression in flagpoles is the Titan telescoping flagpole. This flagpole has now been preferred as the best flagpole in the market by multiple buyers.

 

Let us discuss in detail: 

The Residential Telescopic Flagpole

You would have seen Flagpoles towering over the neighborhood, visible by all. Good & High-quality Flagpoles stay long-lasting & sustain high-temperament wether conditions.

How It Works

A telescopic flagpole includes tubes that crumple on by themselves. The secured interlocking covers give exceptional endurance at each joint. 

The telescoping flagpoles are easy to use as you don't need to untangle a fixed pulley every time a flag knots up. You may even lower the telescopic flagpole to the ground at any time you want. 

A Titan Telescoping Flagpole comes with sewn stars, hardware (necessities), a ball topper, and a ground sleeve.

Steps to install 25 Titan Telescoping Flagpole / 20 Titan Telescoping Flagpole:

Step #1 - Start by fastening your flag to the stainless steel - spring-loaded flag snaps. Post this raise the top section first. 

Step #2 - Extend it up until it stops. Elevate the part when rotating it to the right and then down. Ideally, it should captivate itself into the interlocking sleeve. If you cannot mesh the interlocking sleeves completely, it may damage the sleeves or lead to the flagpole collapse. 

Step #3 - Repeat with the rest parts of your flagpole. Do this process again to lower each section. Always lower or reduce each section slowly hand over the hand, so it doesn't free-fall on the flagpole sections.  

 

How to sustain Titan Telescoping Flagpole most effectively -

Your Titan Telescoping Flagpoles are virtually maintenance-free. There are no greases required at any time during the flagpole's life. You may also clear the surface of your flagpole with liquid soap and water by using a car wash mitt or sponge. Make sure to rinse thoroughly and wipe it dry.

In the Titan Telescoping Flagpole kit, you can get a premium Nylon US flag along with other necessary items and easy use to follow installation instructions.

These come with high-strength, anodized aluminum tubes and have extreme joint stability. The Pole usually comes pre-assembled and thereby extended for further modification. Many companies such as Ameritex Flags even offer "limited lifetime warranty."